Airalt Cartridge Dust Collector
The Airalt cartridge dust collector brings a robust, cylindrical cartridge design to the finest and most respirable dust a wood plant produces: the bonded MDF and particleboard particulate coming off a panel sizing line.
- Filtration
- Cylindrical cartridge media
- Siting
- Indoor
- Mobility
- Fixed
- Dust profile
- Respirable, bonded, fine and dry
- Pairs with
- Beam saws, panel sizing centers
- Best for
- Panel processing and other fine-dust duty
A cylindrical cartridge is a different shape decision than the Aircompact's vertical layout, and it comes from a different lineage: the platform was originally built for chemical and pharmaceutical filtration, where consistent capture of very fine, dry particulate is the entire job.
That heritage is exactly why it fits panel processing. Cutting MDF and particleboard on a beam saw or sizing center produces the finest, most respirable dust of any wood process, bonded resin particulate that behaves differently from solid wood dust. The Airalt's high filtration surface area and robust cylindrical construction are built for that consistency.
Coral USA has carried the Airalt Cartridge into its wood dust lineup as the recommended unit for this specific challenge, backed by the same design, commissioning and US-based support as the rest of the range.
Respirable dust needs cartridge-grade media.
Panel processing changes the filtration problem, and the Airalt's cylindrical construction is the response.
Solid wood dust from ripping or planing is a mixed particle size that bag media handles well. Bonded panel dust from MDF and particleboard is different: sizing centers and beam saws cut through resin-bonded board, releasing a much finer, more uniform, more respirable particulate than solid wood produces. Bag and sleeve media, built to shed a mixed cake efficiently, are not the right tool for that fine a particle. A pleated cartridge element, with far more filtering surface folded into the same housing volume, is.
The Airalt Cartridge's cylindrical housing is the same robust construction Coral USA originally engineered for chemical and pharmaceutical filtration duty, where consistent, high-efficiency capture of fine dry particulate is the baseline requirement, not an edge case. That heritage translates directly to panel dust: the demands are close enough that the platform needed no compromise to do the wood dust job.
Because panel sizing lines often run continuously, filtration surface area and reserve capacity matter more here than on an intermittent job-shop line. Confirm airflow, hopper capacity and duct routing for your specific beam saw or sizing center configuration during a factory visit rather than assuming a standard figure.
Panel sizing, down to the respirable fraction.
Panel processing is where Coral's application comparison points, and particle size is the reason.
Panel Processing
Beam saws and sizing centers cutting MDF, particleboard and plywood produce the finest, most respirable dust of any wood process, exactly what the Airalt's cartridge media is built to capture.
CNC Woodworking Support
Nesting cells cutting panel stock ahead of a sizing line often pair with the same cartridge-grade filtration used downstream.
Continuous Sizing Lines
Facilities running a beam saw across multiple shifts need reserve filtration capacity built in from day one, not added after the first maintenance interruption.
Airalt Cartridge FAQ.
What panel processing plants ask before specifying the Airalt Cartridge.
Why is a cylindrical cartridge collector recommended for panel sizing dust?
Beam saws and sizing centers cutting MDF and particleboard throw a fine, respirable, bonded dust that needs cartridge-grade filtration. Bag and sleeve media are not the right match for that particle size.
Was the Airalt Cartridge originally designed for wood dust?
The cylindrical cartridge platform was originally developed for chemical and pharmaceutical filtration applications. Its robust, versatile construction has since been adapted into Coral USA's wood dust collection lineup for panel processing.
Our dust is fine but our space is tight. Is the Airalt still the right cartridge?
Match the media to the dust first, then solve the room. The Airalt's cylindrical cartridge is built for consistent, fine, dry particulate, which is what a sizing line produces. If clearance turns out to be the harder of the two constraints, the Aircompact Cartridge page covers the layout that answers it.
Does the Airalt Cartridge handle MDF and particleboard dust specifically?
Yes. It is engineered for efficient capture of fine, dry dust where consistent filtration matters, which describes the bonded dust produced when sizing MDF and particleboard.
What is the difference between the Airalt Cartridge and the Airalt M Sleeve?
Both share the same robust cylindrical housing. The Airalt Cartridge uses cartridge media for the finest, most respirable dust, while the Airalt M Sleeve uses sleeve media for a broader, less fine dust profile.
Related collectors.
See the sibling Airalt platform and the other cartridge and sleeve options.
Fine dust needs a fine-grade answer.
Respirable dust is the one profile where guessing at filtration grade gets expensive. Book a factory visit; the specification then follows from what your beam saw actually produces, measured rather than assumed.